This is my first post, although I've been lurking for a while. I took my ts9 apart the other day and noticed the black wire from the battery clip had come disconnected from wherever it was soldered. It is still attached to the battery clip but the other end is hanging loose. Upon further inspection the yellow #11 wire has come unsoldered as well. It is still connected to the board but I don't know where it's supposed to go. I'm capable at soldering so I should be able to fix it, I just can't read schematics or figure out where they are supposed to go. If anyone has a ts9 and wouldn't mind opening theirs up and seeing where those two wires go I would send you so much good karma and some imaginary beer!