View Single Post
Old 7th March 2014
Lives for gear
LeeYoo's Avatar

Good to see that so many members have been able to fix their mic input and display.

italio, I just named the pins 1,2,3,4 for easy reference.
Pin 1 starting from the corner of the unit.
You have to connect pin 1 with 3
And connect pin 2 with 4

If you just use wires, the gain is maximum.
If you use resistors, the gain is less.
Higher values is less gain,

Resistors have to have a ratio of 1:10
Smallest value between pin 1 and 3

Most people seem to be happy with 100ohm/1000ohm. (high-ish gain)
(Picture is from .doc in post#41)
Attached Thumbnails
MOTU 828 mkII USB crackle-resistors.jpg