View Single Post
Old 9th June 2006
  #5
Gear Nut
 

Solution

We did try to set the I/O to default, but to no avail. So after playing around with every ridiculous configuration we could come up with, we finally set Hardware Setups to look for 8 channels of ADAT (which we don't have), and then tried setting the I/O to default again. Thanks to sdelsolray's response, we realized that we weren't even *seeing* 17 and 18 until we did that. That (counterintuitively, I might add) did the trick! Thanks for responses, all.

-Zen