View Single Post
Old 7th December 2011 | Show parent
Lives for gear
In my FP10 I heard a ver soft 'hum' (in dutch: bromtoon), I don't know where it came from, but searching the net I've found the S/PDIF mod as well as suggestion to use a DC adapter. The latter did the trick for me; the FP10 specifies at the adapter plug that is can use 12-24V DC, so anything in between goes. I took the LCD adapter which is 12VDC and 6A with a fitting connector, hooked id up, switch FP10 on, and raise mic-pres to max: hum was gone.

Maybe check this