View Single Post
Old 18th May 2006
  #4
Gear Addict
 
Psyko/Acoustics's Avatar
 

Not sure I totally get your question, but;

From what I understand, what we call "latency" (i.e. some kind of time delay) exists in all signal transmission regardless of converters and whatnot to some degree.

You might be able to get away with it in most analog cases but it never hurts to be careful... As an experiment see if the delay time varies from piece to piece, or as you add gear to the signal path. I've never inserted any outboard in Cubase so I'm not sure where this gets displayed, I could go RTFM but I usually act on a need-to-know basis with this kind of thing.

That's all I can say, maybe someone else can really give you the real low down...