View Single Post
Old 18th May 2006
  #6
Registered User
 
Rick Sutton's Avatar
 

I built a bass box that sits about 50' from the control room. At first I used it at the tracking stage but recently have been using it at mix. It is a very heavy particle board contraption that has it's walls filled with sand. It is on heavy duty casters to eliminate as much floor coupling as possible. Size is approx. 4' wide by 6' long and 5' high. It is treated on the inside with 703 and sonex. I send a line level send from my board and drive a Mosfet amp (about 60 watts) into a hartke 4x10 cabinet. The mic is a neumann U47fet. Been using it quite a bit recently.