View Single Post
Old 17th May 2006
Lives for gear
Slaytex's Avatar

I'm at work on ****ty speakers so take this for what it's worth. I mainly here a difference in level. When you ran into the MP and applied some gain it was very similar to the ITB. What level setting is you're FF800 on for it's in/Outputs? There is a lo gain/-10/+4 & Hi gain/-10/+4 check box. Make sure these are set correctley or you may get some sound quality issues. I haven't used outboard gear with my FF800 yet so I don't know the ideal way to set it but I would leave everything at +4 for both In/Out. When tracking I set my Inputs on the FF800 to Lo gain so I can run my API 3124 hotter. I would not blame the converters just yet. Hope this helps.