View Single Post
Old 14th July 2011 | Show parent
  #5
Lives for gear
 
Lee Cardan's Avatar
 

cool
so, lets base it on:



two stages in series, dual gang 100K linear pot (1 gang per stage).
Sounds easy enough, now, question:

How many degrees shift will each stage produce? And one stage is not enough?
1uF NP decoupling cap on input, output, and between stages?
10K for gain setting resistors, and 100nF for the cap OK?

And, if I want to work with balanced signals.... ?

I'd want the signal to be perfectly clean, transparent