View Single Post
Old 8th March 2011 | Show parent
  #13
Quote:
Originally Posted by Young.baws View Post
Hello Psycho_monkey,

I have a similar issue concerning the ADAT recognition in Logic Studio...

Here is my setup:

TL Audio Fat Track with TLA ADAT interface ---> Digi 002. The Fat Track is the master clock.

I've set "analog 9-10 input" (for ADAT 1-2 input) to record a track. It's possible to record a source but I got many clicks from time to time. Because Logic is not set to "optical clock source"

In Pro Tools, everything is working properly: I just go to hardware setup, select optical instead of internal. I can set ADAT 1-2 to record, & I got no clicks. If I don't set PT to optical I got the same thing (clicks on recordings..)

In the digi core audio driver it's not set to spdif.
I've changed the configuration in Logic:
sync/audio sync/core audio/external
I've added the sync mode on the tool bar & activated it

I still get clicks into my signal though.
Can you give me some tips to resolve this issue?

Have a nice one,

Thanks
From memory, sync mode in the toolbar is to do with timecode sync, not clocking.

When you load the Coreaudio driver, then choose hardware setup, you should see a tab for "clock source" - I think it's on the bottom left (can't check right now, don't have an avid interface at home anymore). Set this to ADAT?

Try clocking the other way round - so the 002 is the master - does this work?
Show replies