View Single Post
Old 21st August 2010
Gear Maniac

I have a 15....modified it quite a bit. One of the mods involved making the 'monitor A' and 'monitor B' stereo pairs into a pair of stereo master outputs I designated stereo A and stereo B. These were fed from the eight submasters via the ranks of 'monitor A' and 'monitor B' controls above each submaster fader. Much modding of these sections helped with greatly reducing the noise introduced in this section of the mixer (by an average of 9 dB per channel per submaster).

I have some pix somewhere, and schematic pix (with mods drawn in)....will post here if there's interest.