View Single Post
Old 2nd December 2009
Lives for gear
RTR's Avatar

Originally Posted by rackdude View Post
Cut up a piece of foam and you have it for free basically. I took a piece of foam out of a prop closet at the theater I work for and put that under my speakers. Don't pay for a MoPAD.
+1000..I used a few pieces of foam/hi absorbers and can even angle them, all you have to do is apply more pressure/push down real hard on the front of the speaker and it settles in to the foam o with a angle...I would NEVER pay for mopads..but thats just me, I am NOT knocking them, just prefer the DIY cost!!