View Single Post
Old 18th November 2009
  #2
Lives for gear
 

They are probably marked with some variant of an OEM part number, but the value and voltage can be verified from the schematic by where it is used.

10SE1 = 10uF electrolytic or tantalum, 25V or more.
1M50E1 = 1uF, 50V electrolytic or tantalum.
470M35E = 470uF, 35V, electrolytic.
.1MD3 = 0.1uF, 50V or more, ceramic

The 10NPSE1 would be 10uF non-polar, probably 25V or more. To know if it's tantalum or not, look at the PC board.