View Single Post
Old 10th November 2009
  #3
The Lynx Aurora is just an A/D and D/A converter. You will need external preamps and a monitor control such as the SPL 2Control. To interface with the computer you need a PCI or PCIe AES/EBU card such as the Lynx AES16. Otherwise you can can FW if you don't have PCI/PCIe slots available using the LT-FW option card from Lynx.

Generally how you want to set this up is routing D/A outputs 1&2 to your monitor control. In the software you set your master fader (or master aux or whatever you setup) to outputs 1&2.