View Single Post
Old 13th April 2009
  #8
Cheers!

Thanks to fader8 for providing the filter analyzing graph.



Notice that the gain parameter is inactive. This resonant boost is only caused by the Q setting in the high pass filter.

I've added the following to the original post:

How to counter a wide sibilance area
Normally a sibilance problem occurs within a specific area, e.g. around 7 kHz. If you're having problems with both "sss" and the lower frequency "chh" sounds then try lowering the Q value. Go from the preset default of Q=5 to around 2 or even lower. Do this while in the "Listen" mode in step 2 in the guide above. You need to re-adjust your threshold after doing this.