View Single Post
Old 25th July 2002
Lives for gear
C.Lambrechts's Avatar

have to rectify one thing .... the midi issue .... midi channels also have an input .... which I had forgotten about .... I allways left it on all .... since the PRE acts as a controller it was sending midi information to all channels with ALL selected as input. as soon as you leave out the PRE and select the correct input device everything is fine.

On another note ....

every single piece of gear has ground on pin 1 ... hot/ cold on 2 and 3.

not the PRE : PRE has ground on pin 3 hot / cold on pin 1 and 2.

GREAT if you want to hook up say the balanced outputs of the sampler to the balanced line instrument inputs of the PRE ..... Guess next thing digi is going to sell custom cables for its PRE too .... dfegad tut