View Single Post
Old 25th July 2005 | Show parent
 
Lives for gear
 
Gerax's Avatar
 
No, it's not possible, because the S/MUX protocol for the ADAT ports on the 002 isn't supported .
Sorry but this is one of the major things (intentionally) overlooked by digidesign in its LE interfaces, as is the lack of a dedicated word clock .
At double SR you are stuck with its 8 analog and 2 SPdif inputs for a total of 10.

Quote:
So I'd also like to find out if there are any hidden problems associated with adding on say 8 channels of, a rossetta,or a lucid or,or whatever.
No issues that I know of: you just clock Pro Tools to the ADAT port in the HW setup panle and you're done. I did it many times with external converters and preamp. The best thing however would be to run all of the digital machines tied to a single word clock master, be it ADAT or Spdif in the 002 and WC to the other devices. Those who did it say they noticed and improvement in the quality of the 002 onboard converters too.

Hope this helps

L.G.