View Single Post
Old 17th September 2008
  #4
Lives for gear
 
Weasel9992's Avatar
 

Quote:
Originally Posted by naethoven View Post
I've been working on a design for my studio, and I've come to this point. The original thread was called "How Much Space Between the Leaves" and has some really good info in it. Feel free to reply there (or here if you wish).

My questions at this point are about the angles of the CR walls.

1) Ideally, does the "real" room need to be a true rectangle with 90% corners, to the exact measurements of the room ratio, and then the faux walls that you see be at different angles to reflect HF to the back of the room, (LF being subject to the "real" room)

OR...

Can the "real" room BE the angled walls of the CR?

2) When I do build a splayed "real" wall, how do I correctly match the ratio I have chosen to use, as I would with a rectangular room?

3) What are the angles for the ceiling, front, and side walls (at each change all the way back) for the CR?

Is there anything else I need to be researching about CR construction?

Thanks guys.
Attached Thumbnails
Have you looked at John Sayers' forum? That might be a really good resource for you.

Frank