View Single Post
Old 20th December 2002
  #7
Gear Maniac
 
fishtop_records's Avatar
 

My read of the P+G product data sheets would indicate that
this is truely a crazy idea.

You would have to not only convert the MIDI MMC
to appropriate motor control, but you need a feedback
loop so that you don't drive the fader up against
the stops at either end. The data sheet clearly warns
against this.

I would expect that if your value your time at all,
it would be more cost effective to buy a comercial
board that has it.

As faeflora said, it will take a lot of time and money.
Maybe cubic amounts of money and/or time