View Single Post
Old 12th December 2002
  #8
Quote:
Originally posted by NYC Drew
Boss,

With all those isolation transformers on the audio, make sure you got phan_pwr for your active DI's and condenser mics.
Of course...

All our passive mic splitters with isolation transformers have one direct out and one to three isolated outputs. The console that gets the direct out feeds the active mics and DIs.

All our active isolated transformer splitters have phantom power within the splitter itself, so you don't have to feed DC power down the snake cable. When you do use the individual phantom power switches from your console, one active splitter brand attenuates the channel by 10 dB and the other brand adds 10 dB of gain to the channel. It uses the dc voltage to adjust the gain remotely. There's even a delay when you switch the console phantom on, so you don't screw anything up onstage by mistake.

What do you think?