View Single Post
Old 11th September 2004
  #19
Guest Moderator - September 08
 
Dave Pensado's Avatar
 

Pensado ramblings continued

OK, so this time let's focus on kik drums. Make sure you can hear the kik all the way down to 40hz. If you can't, get a synth and make up a sine wave based sample kik from about 80-40. EQ your original drum the best you can. Don't compress it, just pick a great sample. Now, take a piece of that drum (mult it, use a send etc. or if in PT make a time aligned copy) and compress the dog snot out of this "copy". A good starting point is fast attack fast Release, ration of 7-10. and knock off about 6-10dB. This will be your midrange knock, and the frequency that makes it sound loud. Add this back to the original sound. Now take another copy and compress 20-30 dB and roll out midrange, say 600-2K. This sound should only be a "tick" and a thud. Add this back in. Add the sub (sample from synth), the knock, and the tick while in the mix, so you can really tell what's going on. If I need to explain this more, let me know. Fat lo-end is a lot of work. Next we will discuss bass.
4
Share