View Single Post
Old 29th July 2004
Lives for gear
faeflora's Avatar

Originally posted by ISedlacek
Not really. What djs writes (not sufficient volume control) scares me. I absolutely do not feel like moving with some screws within Lavry. With such a rough action (decreasing the output volume), how can you be sure, that your L and R remain in exactly the same level ??

Any decent analyzer software will display .1 db increments.

What you do is feed D/A outputs back into the inputs and twist the screws while watching the meters or db level in the daw. Just make sure your monitors are off or do something so it doesn't feedback.