View Single Post
Old 14th October 2020
  #2
Lives for gear
This is probably not the answer you wanted to hear, but I'd highly recommend a digital board for what you do.
For just a bit more than the Tascam costs, you can get Behringer X32 Producer or if you add a bit more money, X32 Compact. A digital console would give you so much more control of sound and instant recall would make complex shows much easier to run.

If you can buy used, you can get a decent digital board for less than the Tascam costs.

Re. phantom: by standard, it's supplied to each XLR input via two 6.8 kOhm resistors - max. current is ~14 mA. While I've heard that there was some gear that supposedly had problems, I can't imagine that someone would design a board that couldn't supply enough current nowadays.