View Single Post
Old 10th September 2020
  #5
Lives for gear
 

it won't - you will just loose space and mess with the slew rate..

you say low ceilings so lets say 8 foot and under? -

cheap steel I beam and LOTS of mdf board - as close to floor to ceiling in height and 1.5 foot deep - angled like fins hung from the beam.
if steel is too expensive then build a girder from 3 layers of 2x8 and glue clamp and screw together
similar to the pic below
Attached Thumbnails
Panels at floor level VS raised-screenshot-2020-09-10-14.18.34.jpg