View Single Post
Old 3rd August 2020
Here for the gear

In an attempt to provide useful information, have some photos.

One is of the side of the microphone where you can see the one screw.

One is of the XLR connector where you can see the XLR connector.

The other is down the barrel with the head and capsule off where you can see the other side of the XLR connector, that being the side I would like to apply solder to.
Show replies
Attached Thumbnails
Taking apart an AKG D310-img_3783.jpg   Taking apart an AKG D310-img_3782.jpg   Taking apart an AKG D310-img_3780.jpg