View Single Post
Old 2nd August 2020 | Show parent
  #4051
Lives for gear
 
gravyface's Avatar
Quote:
Originally Posted by Billy Budd View Post
They don't use CueMix - CueMix is for the previous generation of MOTU interfaces.

The settings of the AVB interfaces (including mixing) are controlled through a web browser, referred to as "Pro Audio Control"

When you have linked and configured two units together via AVB your DAW only recognises the unit that is connected via USB/TB. Channels on the "slave" unit are seen as additional inputs and outputs on the primary unit.
Ok, so I would see an aggregate number of inputs and outputs in the DAW, which would start incrementing from the master (inputs 1-14 would be the 1248 as master via TB, with inputs 15 to 22 the 828es, as slave)