View Single Post
Old 1st July 2020
  #7
Lives for gear
 
andersmv's Avatar
 

Quote:
Originally Posted by mbrebes View Post
Do you have a multimeter? If you do, the first thing I would check is the grounds. Resistance should be 0 ohms between pin 1 and the XLR shell. Also both of those points should also measure zero to the outside metal casing of the microphone. Many of those old Turner mics are high impedance. Open the XLR and see how it is wired.
That's the problem, I can't really get inside the mic without possibly damaging the capsule. It's a weird/rare model, so I'm going to trust my tech to do that eventually. I know I'm being annoying and making this more difficult than it should be, I was just curious for some insight in the mean time. I'll check all that with a multi meter. I do know the impedance is lower at 150, they included that on the model label.