View Single Post
Old 21st June 2020
  #1
Here for the gear
 

Help with placement in suboptimal room

Hello everyone!

I'm currently in a situation where I have an extra room so I figured I'm going to dedicate it to being a studio/office room. The room itself is far from being a good fit acousticly, so I'm really only looking to make it suck a little less. The room will mainly be used for mixing, not so much for recording.

I've uploaded a sketch of the room measurements as well as some actual pictures. As you can see in the pictures the windows are not aligned with the wall, they sit roughly 30cm/1feet deep into the wall. They are also placed at different heights.

I have attached a sketch of one possible placement. It benefits from the longer side of the room but what worries me is if the big window is going to cause problems since isn't centered behind the desk.
I'm also aware that the bass is going to be the main issue in this room, but I can't really treat the corners symmetrically (if that matters?)


I'm also planning on making some gobos for the early side reflections and two for the rear wall, but I intend to do room measurements before building these (and I have to decide on a placement before measuring). I prefer gobos for the mobility since I intend to move next year.

Any feedback would be highly appreciated!
Attached Thumbnails
Help with placement in suboptimal room-room.jpg   Help with placement in suboptimal room-4.jpg   Help with placement in suboptimal room-1.jpg   Help with placement in suboptimal room-2.jpg   Help with placement in suboptimal room-3.jpg  

Help with placement in suboptimal room-placement_idea.jpg