View Single Post
Old 20th June 2020
  #3
Lives for gear
 
andychamp's Avatar
 

In RME Total Mix you are currently routing your Software out 5/6 to your main out.
You should send it to hardware out 5/6
Click on 5/6 in the bottom row, to select it as destination (its colour will become brighter, like the master is now, and 5/6 should show up as destination below the faders in the two upper rows)
Now you can turn up 5/6 in the middle row.
TotalMix is a powerful tool, but can be a bit confusing at first contact.
I highly recommend you keep it in Submix mode, at least for now, or it‘s easy to get lost in the routing.