View Single Post
Old 4 weeks ago
  #24
Gear Guru
 
Muser's Avatar
from what I understand, he’ll tend to use the eq and compression as minimally as possible. so if there isn’t enough low end in the kick, he’ll use an eq for targeting the frequency there isn’t enough of, and then put the return into the same buss to make a resonant feedback loop. and then maybe first use a comp to limit the snare as opposed to compressing it as such. but you don’t want to be encountering any latency in feedback loops, so that would have to be mitigated within the system you are using. it needs to be spot on to maintain the phase coherence. but I’d doubt he’s shy about using eq or compression where it does the job he needs it to do. in that sense, avoidance is different from evasion.