View Single Post
Old 21st May 2020
  #2
Lives for gear
 
NReichman's Avatar
 

I'm not entirely sure where your pain points are, but you can setup your IO page to conform to the SMPTE channel order spec, and work very easily in Pro Tools, hearing things panned where you would expect them to be, even though the PT meters that are using the FILM order don't reflect the channel order in your room. So yes, of course you can monitor through DAPS. Unless latency is what's bugging you. And, you shouldn't have to bounce tracks and load them into a new session. Send/Return did appear to be less CPU intensive than Dolby Audio Bridge, but you're not forced to use DAB. I think we need more info from you...