View Single Post
Old 18th May 2020
Originally Posted by John Eppstein View Post
I don't think I follow you. Why would 90 dB of gain on a .775V source clip badly? Available gain should be a function of PS voltage. The PS of the KGB runs at +/- 24 VDC. Is that not adequate?

The test spec given on the A-Designs site is 2kHz, btw.
80 db is a gain of 10,000. If that gain was applied to a .775 volt waveform the resulting output would be 7750 volts. It will take quite a bit of power supply voltage to avoid clipping that one.

Open loop gain (maximum available gain) and used gain are quite different things.