View Single Post
Old 5th May 2020
Lives for gear
Jens Eklund's Avatar

Unless very deep, diffusers (especially if 2D) will not do anything in the range normally associated with boxiness.

Use proper absorbers, pressure based if you want better low frequency performance and also avoid absorbing the upper range (that you might want to keep in a tracking room unless early reflection surfaces related to recording sweet spot), to tame issues in the lower frequency range.

Before even thinking about diffusers, please educate yourself on what they do and what they don’t, and how to use them properly in a room design. Here’s a start:

QRD Diffuser for Tracking AC Guitar