View Single Post
Old 24th February 2020
  #9
Gear Nut
 
ccmdav's Avatar
 

I'm still kind of new to AA plugins... is it normal behavior for the master output (in this case in the center slot of the plugin) to not attenuate like a master output? Here's what I'm seeing - just for the heck of it, I boosted the input to max, chose a preamp that had plenty of distortion (B and C2 both have it), and was surprised to hear that when I turned down the master output, the "wet" signal was not attenuated. Just the "dry" signal was. So all I could hear was distortion and some kind of a whistling sound. I know these are fringe settings, but... something doesn't seem right.

Also, the "whistling" sound is quite noticeable on preamp D when the input starts to saturate. I'm just testing on a drum bus. Even with the output set to 0.

Last edited by ccmdav; 24th February 2020 at 04:44 PM.. Reason: Preamp D sound