View Single Post
Old 21st November 2019
Lives for gear
Originally Posted by Joadmz View Post
One thing I am not really happy about is that in order to use the stage box I have to clock through the dante card/slot one on the board and cannot use the M7clock or my outboard isochrone clock which I really like to use - so there's that.
You could just set the console as external master and clock the console to your external clock.

Obviously the Ri8-D can only clock to Dante—there’s nothing else on the back—but that shouldn’t stop you from using outboard clocks.

All that said there’s no issue clocking to Dante. It’s frankly much easier, and adds an element of clock redundancy.