View Single Post
Old 7th November 2019
The touchmix series is known to have a low output but this can be easily overcome with a few key settings. Your gain knob position sounds right for the tm16 though I own the tm8. There is also digital gain available too if you need more of a boost. I try to get my mics a little past 0 or peaking a bit into the yellow, so try running them a little hotter.

Check your dynamics section because you may be squeezing the signal too much and you might need to back off the threshold. I would also add some makeup gain if you are hitting the compressor. I add about 4db in mkup gain.