View Single Post
Old 5th October 2019
  #2
Here for the gear
 

Hey Danny,
I think you mean the sine wave, which is routed to the VCA, bypassing the filters, the saw and square waves are routed to the filters. On the CS the sub osc is an LFO. If the sine wave is outputting sound, then the osc and vca are working. How about the noise, is that producing sound? If the saw/square & noise are not producing sound then I would expect that the problem is with the filter section. Try opening both filters all the way HP althe way down, LP all the way up - might be the filter env. This may narrow it down to one or the other filter. That's about all I have without being in front of the CS. Hope this helps.