View Single Post
Old 3rd October 2019
  #6
Lives for gear
 
bambamboom's Avatar
It depends a lot on many other factors such as the actual tuning of the drum, the speaker/PA system quality, the room etc etc, but you might want to try the "death to 500" trick.

It's as easy as it sounds. Cut at approximately 500Hz by a hilarious amount (likely as much as you can) then add a bit of LF and HF to taste.

With only 3 very limited bands of EQ this will probably get you in the ballpark of what you're looking for.

I suspect the speakers are a very limiting factor, as those are not appropriate for getting a big kick sound.