View Single Post
Old 19th September 2019
  #4
Lives for gear
 

Quote:
Originally Posted by joint.therapy View Post
I used the gate out on the Korg to the Dynacord delay trigger in, on the front panel. It worked fine when I ran the Korg by itself. Once I ran the clock divider into the Korg sync in, it would produce noise.

I just did another test with a dotcom Q173 Gate Math, set to gate, and I had the same noise issue.

I did swap cables at first but I don't think that could be the issue because it operated as expected with the the Korg.
Sorry, maybe that wasn't clear... I meant switching the cable position, not the cables ie checking that you are still using the gate out, not the sync out of the sq1.