View Single Post
Old 18th September 2019
  #112
Gear Addict
 

Quote:
Originally Posted by Jason Foi View Post
Because it was your thread that has good info that can help you and yet you have the same problem now. I assure you that 900+mm of appropriate fiber/gfr in a suitable volume is not unneccessary. It is not uncommon at all for professional designers to have entire walls 2-3 feet thick of fluffy fiber. I've often heard of them devoting upwards of 60% of a control rooms volume to acoustic treatment.
thanks I read it but not sure how it is helpful as this thread is really about interpreting measurement results. Also, If you look at my measurements I think the problems are not with the low end which means I used enough fiber. If I hadn't the low modes would be causing the problem. Do you understand what I mean?