View Single Post
Old 15th September 2019
  #15
Moderator
 
Reptil's Avatar
The german company RTW has been producing metering solutions for pro audio and broadcast professionals for 50 years.
At the IBC they showed a number of recent products.

Pictured here is the TouchMonitor TM7. It has the operational concept and GUI of their TM9 in a smaller format.
Both the TM7, TM9 and TMR9 offer Powerful DSP platform for parallel display of multiple instruments.
The monitor is available in different housings to suit different environments. The instruments can be scaled and repositioned on the display.
The latest firmware version expands the basic software to 4-channel display, 4 x Mono, 2 x Stereo, 2 x Mono and 1 x Stereo can be measured without the need of an activated Multichannel licence. RTA provides a 1/12-octave mode, Cinema Loudness standards (LEQ(M), TASA, SAWA) have been implemented, and the Audio Vectorscope instrument allows up to 4 instances. The output routing can individually be adjusted for each preset, all presets can be exported or imported at the same time.
IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-touch-monitor-front.jpg
The back of a TouchMonitor TM9
IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-touch-monitor-back.jpg

Even smaller, with a capacitive 4.3" touch screen the TM3-Primus, TM3-Smart and the TM3-3G Smart will fit in any setup. All three devices offer precise metering with the same GUI, the difference is in connectivity and some features.

The TM3-Primus pictured here offers full feature set for multifunctional audio measurements (analog, digital, USB audio).
It has Analog 2-channel stereo input via unbal. RCA, adjustable from –22 dBu (61 mV) to +24 dBu (12.28 V) and Digital 2-channel stereo in- and output via S/PDIF (RCA)
There is a Micro-USB connector for digital audio inputs (stereo, 5.1) and USB power supply (USB mains adapter or computer).
IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-tm3-primus.jpg

The TM3-3G Smart pictured here, includes a remote 3G-SDI interface box with audio I/O, USB and GPIO.
Besides PPM and True Peak instruments, the TM3-3G Smart features comprehensive loudness measuring features conforming to all relevant international standards (EBU R128, ITU-R BS.1770-3/1771-1, ATSC A/85, ARIB, OP-59, AGCOM, CALM Act). Loudness instruments include single-channel and summing bargraphs, loudness range, loudness chart (TP, M, S, or I value over time), and numerical displays. Moving Coil instruments display stereo signals with different scales and modes (PPM, VU, Loudness, BBC). With the Monitoring instrument an onscreen level fader is available. And with the Timecode reader instrument an external or SDI timecode can be decoded and displayed.
IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-tm3-3g-smart.jpg

Please visit the manufacturer page for more product information.
Attached Thumbnails
IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-tm3-3g-smart.jpg   IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-tm3-primus.jpg   IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-touch-monitor-back.jpg   IBC 2019 gear (microphones, monitor speakers, recorders and some other gear)-touch-monitor-front.jpg