View Single Post
Old 14th September 2019
  #2
Lives for gear
 
Jason Foi's Avatar
 

Congratulations on such a large space. Ebu spec calls for around a minimum of 200sqft for a control room with around 1500cuft of volume. You can go up to about 750sqft/3500cuft, but i would keep the control room as small as practical for your needs and maximize live room. As far as ceiling goes, the higher the better. If you must have a sloped ceiling, orient the CR so that the ceiling gets higher twards the back of the room. You may already be planning to, but i would add a machine room and maybe an iso booth. If possible, no parallel walls in the LR is a big plus.