View Single Post
Old 23rd August 2019
Did some measurements again.

First I started with the speakers placed on the table with a speaker-speaker distance in 110 cm and a listening distance of 110 cm. Sidewall distance of the speaker is ~178 cm and front wall distance 84 cm.

Left speaker

Right speaker

Both speaker

Here I put the left speaker on the ironing table with a front wall distance of 55 cm

and here closer to the wall with a distance of 40 cm

I didn't move the right speaker and it's also not possible for me to move the whole table further to the wall.

There's a dip at around 170Hz for the left speaker when they are positioned on the table which is not there for the right speaker. Maybe this is cause by the asymmetric rear wall?

Here's is the link the REW file: