View Single Post
Old 18th August 2019
  #2
Lives for gear
 
Starlight's Avatar
 

Ideally you would dampen the speaker so that vibrations are not transferred to the cabinet. This means finding a material that would be partially (but not fully) compressed by the weight of the speakers. I do not know how you can tell whether the cork is partially compressed.

It gets difficult to know what to recommend when the budget does not stretch to £15. I would suggest saving up for a pack of sorbothane hemispheres of the correct size and durometer that will suit the weight of your speakers.

Last edited by Starlight; 18th August 2019 at 11:08 PM.. Reason: Spelling