View Single Post
Old 1st August 2019
Lives for gear

Originally Posted by Brent Hahn View Post
This might or might not work in my situation, because the low end bleed from the house into the CR is a two-way street. Even at normal mixing levels, people in the stage right front seats can hear a fair amount of thump from the CR, even if they're not especially aware of it.
Understood, try the other suggestion of mixing in the live room with headphones/IEMs, the problem might only exist (or is worse) in the box/control room, especially since the main offending instruments are not even in the PA. This fact suggests vibration and not loudness is the problem, and stop vibration you need to isolate, and something tells me that a recording truck or major construction is not going to happen tomorrow.