thread: Eventide H9000
View Single Post
Old 28th July 2019
  #257
t_d
Lives for gear
 
t_d's Avatar
 

i can.. i've made an aggregate device with the H9000 and my UA Apollog 16.

so the AudioMidi setup has assigned channels 1-34 or something for the UA and 35-52 or something for the H9000.

my two big questions are... which of those 30 eventide channels are the USB ins and outs.. i've tried random ones and have no luck getting audio in and out of it.

and two, it's not clear to me whether in pro tools i/o if i am supposed to make INPUTS, OUTPUTS and/or BUSSES to get audio to the H9000 over USB


and i suppose that would lead to a 3rd question.. do i then just treat everything as it were a normal send plug in in pro tools. ie: put EMOTE on an aux track and send a track bus to that emote track input.....?

Quote:
Originally Posted by macgee View Post
I haven't done this setup for a while but I think it's exactly the same as if it's physical analog I/O.

In protools, can you see the 16 DAW I/O as available choices for in out?