thread: Eventide H9000
View Single Post
Old 28th July 2019
Lives for gear
macgee's Avatar
Does protools use some kind of I/O plugin to route out/in?

Perhaps find a YouTube video that demonstrates using outboard with protools. Even with analogue connections it should be exactly the same.

To get a basic test done, you able to output a channel to the H9000 then output from H9000 back to an input channel and record enable to monitor through. If that's how it works there, i remember

In emote, you've been able to route the USB channels through an FX Chain?

Originally Posted by t_d View Post
i've got an h9000 on loan and am having massive troubles integrating it like you say it can below.. with "no other analog or digital connections"

i've got it USB'd to my mac, and an aggregate device made together with my UA apollos 16

but in pro tools (you're using logic, so it may be quite different)...but in pro tools i/o i don't know if i'm supposed to create BUS channels, INPUT channels, or OUTPUT channels corresponding to the h9000 USB channels...

basically, i'm having no luck getting a track, using a send and an aux channel, to be able to go through the H9000 over USB and be effected.

there is zero information on how to do this in the manual and i can't find anything online.

anyone here with pro tools able to use the H9000 with *only* a USB connection to route to as a send effect?