View Single Post
Old 24th July 2019
  #15
Gear Addict
 

Ok. I took another swing at the wall/ceiling traps and hit a snag by blocking my door by a half inch. “Measure twice cut once” doesn’t help when you’re targeting the wrong dimension. I guess I should sketch three times.

Regardless, here is the prototype. I’m using a 2x3 as a cleat to catch the studs. I’ll have to trim the fiberglass for this panel by 1.5 inches.
Attached Thumbnails
Bass Trap Build Progress-73940c9f-5c57-484b-bebf-fca854e1c7d9.jpg   Bass Trap Build Progress-00f6e55e-ddae-4cfe-a9b3-53c7eb4440ef.jpg  

Last edited by BJosephs; 24th July 2019 at 03:49 PM..