View Single Post
Old 28th May 2019
  #143
Gear Head
 

If the signal from the slower converter is out of phase.. a simple time alignment nudge should fix this I’m guessing. It’s not like the wave forms will be time stretched or anything. Probably have to just zoom in a lot, switch the grid to samples and set it to 1 sample. Phase align and boom should be all good.

I had a convo about this recently actually. The person i talked to recommended using the secondary converter for the signal form the OH mics.

It could potentially cause some issues in the headphone mixes for the artist I would assume.. might be smart to mute these while recording until they are phase aligned if there is a noticeable difference

Please let us how this goes.. it may change my approach for running a split system in the near future.