View Single Post
Old 19th May 2019
Originally Posted by weezul View Post
bust open the Totalmix and loopback your AES and SPDIF to a different input. That's what I do. It's not perfect if you need more than 32IO but i have an audient mico over spdif that I use that way.

I should have mentioned that. I didn't say it because other folks don't have that luxury, they are just SOL if they have more than 32 IO that don't line up the way they'd like.

I take the output from my console through an A/D then go AES into a loopback and record it. It limits me to 30 outputs, but does work. I did make up a separate snapshot to make it easier to switch, but it's still easy to screw up and leave the outputs open on the console and get feedback if it's loud, or phasing in the mix if it's not.