View Single Post
Old 16th May 2019
  #14
Lives for gear
 

Quote:
Originally Posted by Deleted e999d8e View Post
What's the point of this rule if you can make balanced connections between the instrument and the mixer? You'll avoid a lot of pitfalls with balanced connections, especially if you have a long cable run.
PRetty much every instrument I ever had was unbalanced out...and most effects boxes/pedals etc....avoid the decibal drop you get. Check specs of what you have but my guitars/synths/keyboards are all unbalanced out so I just use it on all instruments. Once I get to the mixer then signals are balanced and keep it that way from then on out. Also try to run everything off 1 circuit if I can. I gotta a pretty low noise setup. Mogami helps too hehe.